Frost damage on the outside of the window panes feels we are so decorative that many of us even spray artificial ice flowers in front of the midwinter heels. On the other hand, we react very negatively to imma and ice that appears on the inside of the window. We hurry to wipe away the moisture to quickly find out that it is almost as fast as possible. That reaction is healthy. Imma is small condensed water drops, which are formed when the water vapor in the air meets cold surfaces. It is not uncommon for a house to have trouble with imma, while the neighbor, who is exactly the same, is completely free.
In many cases, the explanation is simple: the immense house has more people in the household that cook traditional food that requires long cooking, such as bathing, showers, washing and dishes often. In short: In the house you live tight and have habits that cause high humidity. In such cases, you can not get rid of immune more than two ways: by changing living habits or increasing ventilation.
Immediately, immune occurs on the inside of the outside window. Most often this is because the damp indoor air penetrates between the windows and is condensed on the cold outside window. This imaging can have two reasons: the inner window is not dense enough, or the ventilation between the outside air and the glass gap is insufficient. A combination of both is also possible. To get rid of this imma, you must seal between the inner bow and the karmen. Do not put sealing strips between the frames or between the outer bow and the frame. If you do that, you stop the ventilation of the glass gap, and then the window will recapture for that reason.
Immediately on the inside of the interior window, this is likely to be due to the fact that the ventilation between the outer arc and the glass gap is too high. This problem eliminates the sealing of the outer arc.
The immanity can be due to damp windows. When the sun is warming up such arcs, it forms water vapor. If the ventilation is limited, the vapor is precipitated as small water particles.
1) Better ventilation between the outer arc and the glass gap, 2) better window wrap, which protects the
against rain, 3) more efficient sealing, such as forcing between the frame and the wall.
When the bathroom's windows and mirrors become immature, this is due to the high humidity of the hot air surfaces that are colder. This imma disappears from the glass surfaces after hand
when the temperature in the bathroom drops and the humid air is mixed up with dry.
If the ventilation is poor and the bathroom lacks a weather window, much moisture remains in the ceilings, floors, walls and furnishings, despite the fact that imman gives. In the long run, this moisture can cause direct damage to, inter alia, painting, kingsets, wood furnishings, etc.
Over time, it also results in uneven air and general uterus. Then it does not have to be. You can solve the problems by putting a fan in already existing imprints. If you choose a fan with time control that allows after-ventilation, you have been given a ventilation that effectively eliminates the confinement.
There are such plug-in fans that are no bigger than half the fan is in the im channel. The fans, which should be coal-bearing for long life and reliable even at low temperatures, are connected to a regular switch. They can be set for after-ventilation from 5-6 minutes up to an hour.
A standard bathroom fan can, paradoxically, contribute to condensation when installed in an exterior wall, where the risk of cold breeds is high. On the other hand, if the fan is equipped with a cold protection, which opens and closes automatically, you have a guarantee of continuous air change. Fans of this kind can be mounted in almost any room, provided they have useful channels.
1. Consider whether the immune is temporary or often recurring.
2. If it is temporary you should weigh really to get rid of the excessive air.
3. If immune is frequently recurring, you should search for the reason, which is almost always an isolation or ventilation error.
4. Make sure there is no stop in the ventilation ducts - especially those that come from the dryer
and the drying cabinet.
5. Also check if you have condensation behind larger cabinets and paintings against the outside walls.
If you are, you may be in the process of getting a moldhouse.
6. If your house is newly built, immune can depend on standing building moisture. It is a very serious threat to
your house, so you should contact the construction manager as soon as possible.
This is how a bathroom fan of plug-in looks. The built-in cold-roll protector works automatically.
To minimize the ventilation required, drill a pair of three sockets through the outer window arc. Ventilation between the outer arc and the glass gap must not be too strong or too weak. Try the right throughput. l a summer house which is not heated during the winter, it can get colder inside than outside. In order to avoid condensation, such houses should not have moisture barrier in walls and ceilings. Ice formation on the windows is frozen, twice as difficult.