Outdoor Lighting with Motion Detectors? Here you will find tips on outdoor lighting with motion detector. Attention to both burglars and guests.

Outdoor Lighting with Motion Detector - Tips

Outdoor Lighting with Motion Detector - Tips


Breakthroughs shine the light. They prefer to avoid detection and sneak into the shadows. The one who is welcome, on the other hand, would like to have it bright and nice on arrival at a home. With outdoor lighting provided with motion detectors, all visitors are noted. And in an environmentally friendly way.

Outdoor lighting

Outdoor lighting is both nice for the living in a house and a safety issue. The more illuminated rides, entrances and balconies are, the less the risk of burglary is committed in that particular property. Those who try to protect the darkness do not get excited about being illuminated by headlights. However, it costs a slant to let the light burn for the level. This applies not least to holiday homes and stronger lamps, such as when traveling to a garage. Then, lighting provided with motion detectors can be a good alternative.

Provides detection

The motion detection sensors are that they respond to motion. Then the power turns on to the lighting and the area is bathing in light. Thus, the lighting is not constantly lit constantly, but only when someone walks over the area the sensor reads. In addition to being practical for those living in the house, they are also energy efficient. Uptime lights up when a car or human moves. The person who lives in the house will then receive light on the driveway when needed without having to turn on any lamp itself. The same applies when the lights are not needed. This will turn off the light automatically. The lights do not differ who is who. Even when unauthorized people move in the area, they turn on. This allows the person in the house or persons in the area to quickly find that someone is in the process.

Correct IP rating

When choosing outdoor lighting, it is important that the luminaire is resistant to rain, wind and heavy wear. Outdoor lighting should always have an IP class of at least x3. If the luminaire is less than half a meter above the ground area, the IP class must be at least x4. Usually, outdoor lighting is on an IP class of 44. The IP class indicates how durable the encapsulation of the lamp itself is and the higher the IP class, the more resistant to external conditions becomes the lamp. The IP classes are listed with two digits. The first digit (in this case indicated by an x) indicates pet protection. If this number is 5 or 5, it means that the luminaire is also dustproof. The second figure indicates the resistance to hydrogen. At the number four, the lamp is protected against water at all angles. A higher IP rating than four indicates an even higher resistance to hydrogen.

Lamp Type

Anyone who wants to buy a lot of lighting and detector soon finds that there are a variety of variants on the market. Several lamp models are sold with built-in detectors. Some are cheap, others expensive. Keep in mind that quality also costs, and the high cost often depends on an electrician needing to install the lighting. The latest technology is LEDs with motion detectors. They are very energy efficient and last for years without having to be replaced. They are slightly more expensive in purchasing, but it saves a homeowner quickly on reduced electricity consumption and on the few bytes. It's even possible to get on outdoor LED lighting, with detector powered by solar cells. One does not need to install a skilled worker, but it is enough with a handy person.

Detector

However, a brand new lamp is rarely needed to make it work as a motion monitor. The only thing really needed is a detector that controls the existing outdoor lighting. Most detectors in the market are looking for infrared radiation and can distinguish between day and night. Different models of detectors can scan different large areas. This applies to both length and width. Make sure that the detector selected also covers the area needed. The location of the detector is also important, especially when it comes to larger areas. It should not be able to crawl below or beyond the detector without detection.

Sensitivity

The one who has pets may think about choosing a detector that is not too sensitive. Then a cat can pass without the light lit. A detector usually does not cost many hundreds of money, making it a very affordable investment to secure home and house. In addition, it makes life more practical. For those who want to combine the detector with timed lamps. These lights for a certain amount of time (eg morning and evening), and if someone treats the area during the night.



Video: How To Setup Philips Hue Lighting and Motion Sensors & Money Saving Tips|

Share

Comments