Painting walls indoors?

Painting painted walls indoors - How to do

Painting painted walls indoors - How to do

One of the most obvious do-it-yourself jobs is to paint the walls of the home . It is also fun to perform because you see the results of your efforts while painting. Painting is a quick and easy way to renew your home. Before you buy the color and take you work, there are a few things to keep in mind. Check if the walls are in poor condition, find out what kind of paint the wall was previously painted with and determine what requirements you have on the newly painted surface. Based on these skills, you can estimate the amount of time you need before you finish the entire painting work.

The actual painting often runs quite quickly, but the process can sometimes take a lot of time. Nevertheless, you should not bargain on the preparation. A carefully done preliminary work makes the painting go like a dance. Before painting, you must protect the floors and furniture from paint splashes. This is especially important if you paint a latex paint, because such paint as dried in is very hard to get rid of. Tape all the lists, door lining and other details that are close to the wall surface you are going to paint, with masking tape. How confident you are on your hand, you can tarnish and get paint on the wooden details. The finished work will then give you a little sloppy impression.

If you "just" wash the walls with a target wash before painting, be careful. Washing until the wall seems completely clean from dirt and grease is quite natural, but it is easy to rinse the wall for a few times. Rinse the wall with clean water and a sponge. Replace rinsing water several times. Once you have rinsed the wall and the water no longer feels lame, the surface is free from the soda solution. Look over the room you should paint before buying paint and brushes. It's not just the surface you should know when you come to the store. It is also good to have noted if there are difficult access points, such as behind pipes or elements in the room. Then it may be good to invest in an element brush or roles that fit behind the element.

Decide whether you may need to extend the roll on the roller or not. The shaft gives you more power when painting, but it can also be a barrier, for example, if you are going to paint in a small space. If you know what you need before you go to the store, the risk is not so great that you are attracted to the wide range and pre-buy you.

Test what kind of color you have on the wall

When you test a painting, you will find out

If the paint is dissolved with water, it is probably a glue.
If the wall is colored dark of water, it is probably a lime color.
If the surface becomes rough, the wall is sandy .
If the surface is not affected at all, the wall is painted with latex, alkyd or oil paint.

Here you need to paint an indoor wall:

Different roles (4) Sponges (5) Piassavakvast
(6) Slipblock (7) Screwdriver (8) Protective gloves (9)



A good rule of thumb when cleaning your paint tools and brushes is to wash them in the same fluid as the solvent's solvent. If you have painted a latex paint, you should wash your brushes in water. If you have painted with alkyd paint, you need to use a paint brush to clean your brushes and tools.


1.Wash a small surface of the wall to find out what color it is. Solve the color up, it is possible. glue color.

2.The color must be removed. Brush the surface with water to dissolve the paint. Use a heavy brush.

3. Remove the paint with filler and sponge. Rinse thoroughly. Is there any color residue left over with thin alkyd paint.

4. If there is a dark spot on the wall during a wash, it is possible. lime color. Calcium dyeing on a dry cloth.

5.Brush the entire surface thoroughly with a piassavakvast or other hard brush. The surface should be firm before stopping brushing. Rinse the wall carefully before painting.

6.If the wall is painted in a blank alkyd paint, you should roughen the surface so that the new color will get a good grip. Use a medium-fitting slip paper and grinder.

7.Walls that do not require pre-work should be thoroughly washed with target washing. Use a sponge and wash all grease and dirt. Rinse in several volumes of water.

8.Remove all loose paint with a fluff. You need to scratch until the paint is firmly fixed and there will be a fixed edge between paint and wall.

9.Pack all cracks and damaged parts with a steel stack and refill the damage with sandpackel. Major damage should be widened. Let dry.

10.Lip the flattened surfaces smoothly and completely in line with the wall. If the damage is large, you may need to flip once more, allow it to dry and then grind again.

11.Use masking tape and tape carefully around door lining, sockets and other details that should not be painted. Make sure the tape is not on the painting surface.

12. Turn off the main power switch. Unscrew the cover to all power switches and connectors in the room. Keep in mind that the cables are easy to encounter.

13. If you are to paint a dark wall in a bright color, you should first ground the wall without covering requirements. You will then get a better grip on the new color.

Paint the wall

1.Spread first all edges to the ceiling, floor, corner and carpentry. Use a small brush so that you can access properly. You can also use a corner roller.

2.A fastener can also be used to paint around the edges because it is easy to have straight edges and the wheels are removable.

3.When you paint behind, for example, elements and pipes, you have the advantage of a elementary roller with a long shaft or element brush.

4. When you add color to roles, it is important that you are methodical. Paint the entire wall without interruption. Streak color from top to bottom in about 1/2 m field.

5.Equire the color by dragging the roller horizontally on the painted field. Before painting the next piece of the wall, you also iron the wall from bottom to bottom.

6.Instead of painting in a field, you can iron the wall in the following motion patterns.

7.Press the wall in a W pattern then that the color covers the wall. Paint one meter at a time and roll with even pressure to avoid bubbles.

8.It is sometimes not enough to get a smooth and nice surface. When the paint is overcoatable, paint the wall a second time.

9. Do not leave the masking tape long before you finish painting. When the surface is dusty, carefully remove the tape so that you do not damage the wall.

Video: Interior Painting Tips. What To Paint First When Painting a Room. DIY walls ceilings or trim?|