Worth knowing about putt houses and paved facades. Here you will find tips on different types of putty on tiled facades and advice on color, repetition and problems that may occur.

Putt housing is about surface on paved facades

Putt housing is about surface on paved facades


All facade cladding protects the body. The choice of facade cladding is crucial to the way a house is felt. A putty house is usually lost for a stone house. The fact that the facade is out of the box reveals a lot about what is hidden in the walls. The casing may like to have a frame of wood, as of stone. Curved facades have a very long life and with good maintenance, where the cracks are taken care of in time, it will be far between the transitions. It's a good thing, because it's relatively expensive to refurbish a house.

What is put house

A puthouse is a house that has a sashed facade, regardless of what the frame is made of for material. The frame itself can be made of wood or stone. The facade is a popular option because it lasts a long time. The cost of repainting is low. On the other hand, the façade costs a bit more to build up at the initial stage. This applies to both facade laying on new and old houses. When the facade can breathe, it dries quickly, which results in less risk of moisture damage. Sometimes murders and other professionals in the construction industry speak about reverted houses. It is a house that used to have a wooden facade, but there the house was built with a sashed facade some time after the construction. It became very popular during the 19th century when stone houses were in the highest fashion. Even today, facades are being converted to transform a wooden house into a paved house.

Many types of pits

What type of pits that fit a particular facade depends on how the facade is built. Often, puts are used that are designed to match each other and the substrate so that a system is created. Common to all pouches is that they consist of binder, ballast and water. The binder may be lime or cement, or a combination of these. Lime-based pots are the classic ones. The ballast is the grain contained in the pit. These grains are usually some kind of sand, or very well-distributed stone cross. The structure and graininess of the plaster can vary considerably. It has everything from coarse to fine grains, and the graininess affects the smoothness of the surface. The choice of potting technology also affects the appearance. Often the pad is sprayed onto the façade, saving a lot of time. But there are also a variety of techniques for putting a house by hand. What kind of puts and how the putty is to be placed on the facade is a matter of taste and taste, and what style fits in the individual case.

Painted facade coloring

A sashed facade can be any color. However, the choice of color type is important in order for the façade to last for as long as possible. The color is part of a uniform system together with the pad, and together they provide a good protection for the body. In order for the color to work as it is supposed to be, it is important that it is adapted to the well that the facade is made up of. For example, facades with lime pads should always be covered with a lime paint, and if the lining socket consists of a lime cement-based plaster (KC puts), a KC paint should also be used. In some cases, painting on the putty is not necessary. The putty used can sometimes be through-painted and thus, in itself, have the color desired on the facade. Avoid plastic paint if it goes. These are considered harm more than they are useful, according to the National Heritage Board. The reason is that they act like a raincoat, and shut up moisture in the well, which can not breathe as it is supposed.

A putty house needs little maintenance

A well-done facade renovation lasts 25-30 years. However, the facade needs to be reviewed periodically to detect damage in time. Also check hinges and pipes. Leaking hangers and dirt pipes can cause damage as well as incorrect window sills. In the case of larger vacancies, so-called facade renovation, it is often best to hire a mason. It is true to really make use of materials and techniques that match what is already on the facade. Otherwise, the repair can do more harm than good. This work is one of the root-deductible works. This means that 30% of labor costs can be deducted from a facade recycling.



Video: Tutorial: "Topography in Autodesk Revit Architecture 2013"|

Share

Comments