Solid wood flooring. Here you will find tips on massive wood floors and laying wood floors as well as grinding and varnishing of solid wood floors.

Solid wood flooring - Great tips on solid wood floors

Solid wood flooring - Great tips on solid wood floors


A solid wooden floor is classic, beautiful and vibrant. By massively it is meant that the floor is entirely made of wood rods with natural vein. It is a floor that is worn on time, but when it can be grinded over and over again, it will still be the floor for many, many years.

Features

A solid wood floor is made of wood, and not like multi-layer laminated floors. Often the wood has been seen in the past, but there are also massive wooden floors in parquet flooring. Initially, the parquet floor was a floor that was loaded with short solid wood boards to produce a certain luster. Today, however, parquet flooring is almost always called a parquet floor. There are a variety of wood to choose from, as well as widths and finishes. The different options do not only look different in one home. Depending on what wood and the surface treatment the solid wood floor is made of, the floor also has different properties. Common to all of them, however, is the living feeling. They both feel and look comfortable.

Woodbreak

The most common wood flooring in Sweden is spruce. It has many twigs and a reddish tone. Pine is also popular and has fewer twigs. Both of them have roughly the same hardness, and are grateful as floor materials. I'm significantly harder. It is a good material for floors that are heavily loaded and which have to withstand some. The ancient birch is slightly harder than fur and spruce, but not as hard as the oak, and has a beautiful light ground color. Even though a Swedish tree is coming more and more, not entirely different mahogany, as well as a box, a wood that has distinct anniversaries and which gives a special character on a floor. There are also a variety of foreign woods to choose from, with different expressions, color and hardness. There are a variety of surface treatments that can be used to emphasize or change the basic color and properties of wood.

Laying a solid wood floor

A solid wood floor can be laid on an existing floor or a flat floor. How the floor is then laid depends largely on the substrate. Sometimes gluing and wet rooms or kitchens or underfloor heating are required, a moisture barrier is required. A motion joint is always required as instructed to prevent the floor from collapsing. Therefore, floor tiles are also required for a wooden floor that conceals the movement. A thinner floor is more often easier to lay, but on the other hand it is also less durable in the long run. Always ask the store about how to lay the floor, or hire a professional floorer for the job. It is root-deductible and often pays for long. A vaulted wooden floor stays much longer.

Surface treatment

Certain wooden floors are sold untreated, others are sold pre-treated. Untreated wooden floors should always be treated after loading, even if they are tilted. The slope provides only protection from yellowing of the wood and gives the wood a lighter shade and should always be combined with soaking or oiling. The most common alternative to a lacquered floor is an oiled floor. The oil penetrates unlike the lacquer in the wood, emphasizing the wood's properties while providing wood with a water repellent protection. Such a floor is more sensitive to stains and is tougher to keep clean. There are many oils that can be used to surface a floor. Some are hot, while others are cold, many contain linseed oil. Still others have pigments that give a different color tone on the floor and all have different qualities. To maintain an oiled floor, regular maintenance is required.

Paint a solid wood floor

The most common treatment of a wooden floor is to paint it. The lacquered wood floor has a water repellent surface that is like a hollow on top of the wood. This means that stains can not penetrate into the structure of the wood and discolour the board. The floor becomes easy to clean. The ink may be colored or uncoloured and of different shine and hardness. The harder the lacquer, the wearer the floor. However, it is difficult to get rid of scratches without having to slip around the entire floor. It is also not easy to paint a floor evenly on its own.

Other finishes

A beautiful alternative to the oiled floor is to soap the wood towers. As mentioned above, a floor that is untreated or leaned to give a water repellent protection. The soap is worked into a layer on the sloped or untreated floor. Then the floor will be wet-dried with the same type of soap continuously and the floor will receive an even stronger protection. Another option is to bite or paint the floor with a floor paint. Betting emphasizes the floor structure, and should always be combined with oil or paint. The paint lays like a covering layer on top of the tiles and basically works as a paint.

Removable

Although the floor surface itself may not last for generations, the floor itself can make it. It is easy to sand the floor and give it a whole new surface. The surface can also change over time. Choose lacquer, soap treatment, bite or oil after your taste and taste, and the floor will be new. It makes the floor a floor that can change over time - depending on the fashion, trends or likes of the owner.

Important to consider

Hardwood floors are the floor that touches most of the temperature changes and humidity levels in the house. Lanes can stumble and gaps may occur, especially when floor heating is used. In order to inhibit the floor's movements, the floor of some fabrics is fitted with slots on the underside. Also, keep in mind that wooden floors must lie in the room for at least one day before laying, and it is essential that the floors are well dried.



Video: How to Install Solid Hardwood Floors|

Share

Comments