Window fittings for new and old windows. Tips on various window fittings, hinges for windows, child safety and burglary protection.

Window fittings - Tips for fittings for new and old windows

Window fittings - Tips for fittings for new and old windows


Windows should emit light in our homes, while the heat losses should be as small as possible. This is an important reason why suspension and locking devices should be chosen carefully and work perfectly. Another reason to have sturdy window locks and locks is the burglary risks. Window with bad locks and fittings is an easy match for a burglary pros. However, it is not just the closure that should be in order. When you want to leave the window open, it is equally important that the mounting brackets work as they should.

An openable window with coupled arc is equipped with four types of brackets. The hinges are the window suspension bracket. These are available in several designs and are therefore the prerequisite for the window to be opened.

Another type of hinge is coupling hinge. These are available on all connected arches to open and clean between the windows. In addition to the coupling hinges, coupled windows must also be fitted with coupling hooks that fix the two arches to each other.

Most newly manufactured windows are provided with a so-called spaniel lock. This lock type is regulated with a handle and usually locks the window arch both in the side of the frame and in the upper and lower part. On windows of older dates, the closing bracket can also be eccentric hooks or harps. For example, the opening window is often provided with some type of spring brackets. This seizure is more important than you might think. An unopened open window can easily blow, but also cause other damage. In addition to these completely necessary window fittings, there are also other barriers to complement. The most common are those that raise child safety or reduce the risk of burglary.

Window fittings on older windows

If you have older windows, these can be fitted with corner iron. These are necessary for the stability of the window arc and should be left behind when renovating windows of this type. Nowadays the windowmaking makes use of some other technique and also other types of glue, which in turn makes the corner fittings unnecessary.

On old windows there is also an older single type of hinge. If you want to keep these but still increase the burglar protection, you can, for example, supplement with lockable shutters. New windows come with modern, effective locking devices that you can combine with other protection if required.

When you insert new windows into an old house of genuine character, try to maintain the details of the old environment.

Window hinges

The window hanging brackets, such as hinges, vary depending on how the window is hung and how it opens. Side-hung windows are usually hung on leaf joints, but also bolt or fork joints are common. If the window opens outwards, the hinges should be designed so that the pins can not be ejected. This is an important detail to make it difficult for a burglary. Whether the bow is hanging on the bolt or leaf joints, the construction and installation of the window is opened inward or outward and if the window sash is fake or not.

Turn windows are not fitted with standard hinges, but are hung with so-called sliding fittings. These window fittings are often combined with a stepless barrier for weathering. This is regulated with the handle. There are sliding fittings that allow the window to be turned completely so that the outside comes inward. This finesse is especially convenient for business windows. Another and a little more unusual suspension bracket is that's dreh kipp. This window bracket makes it possible to change the side-hung window with a simple handle so that it is suspended. In case of weathering, you do not open the entire window, but only on the top edge.

In the late 1800s, windows with linked arches of two Swedish designers were completely unaware of each other. Since then, this type of window has become very common. For the window to work, it is equipped with two types of window fittings - coupling hooks and hinges. The former fixes the arcs against each other in the one side of the window, so that the window is easy to share. This window fitting is available in several variants. The two most common are the same as a pushbutton, and that which locks the arcs against each other with a built-in chin.

The coupling hinges are located on the opposite side of the window and, of course, also hold the arcs together. The hooks / hinges combination allows opening and adjusting of the arches for interior cleaning.

Window fitting bracket

Haspen is the oldest form of window fitting bracket. This has been around for hundreds of years and was designed differently, depending on where in the country it was manufactured. The windowshas were replaced more often by angry or eccentric shakes during the 1900s. The excenter hooks - also called window locks - are an advanced form of hasp that draws the window to the frame. A lock is usually mounted in the upper part of the window sash side and one in the lower part. This lock can also be tightened when needed. The bow and the frame can thus be tightly connected to the eccentric hanger.

Despite the eccentric construction of the eccentric hooks, this lock is more and more obstructed by the Spaniard. This type of locking structure was used quite diligently already in the last century. The rotatable control rod was superimposed and mounted on the inside of the window sill. Handles and bars were sometimes beautifully shaped to enhance the appearance of the window. Nowadays, this rule bar is built into the window sash. In locked position, "grip claws" hook up several sockets along the rim, which makes the window tight. Modern Spaniards can also be supplemented with a key lock, which makes it difficult and can deter deterrence.

Child safety and burglary protection for windows

There are a lot of window fittings that are not mandatory but still very common at home. These mainly have two functions, namely, to prevent children from easily opening the window from the inside and falling out, as well as preventing or obstructing thieves from entering the window path. For example, a child safety lock can be any type of safety chain mounted in the bow and frame. The chain prevents the child from opening the window on its own.

Another type of latch that is available in many variants are the handles that require two laps simultaneously to release the latch. Most of these child safety devices are easy for an adult to open with one hand, while small children can not handle such a lock with both hands. The most common burglary guard for windows is simply to lock the bow in the frame with a key. Window locks are available in several designs for all types of windows. The lock can not prevent a thief from crushing the box and creeping in anyway, but it makes a lot of things difficult. Many people sleep best with the window on the verge. With a spring bracket with lock you can also sleep safely.

The most powerful window lock is undoubtedly grate. These are in beautiful sliding constructions that actually very little reminiscent of grids. Nevertheless, most of us avoid assembling throws because we are not drawn to the idea of ​​being 'locked' in our own homes. If you are considering this type of burglary, you should know that the gratings are most effective when mounted inside. As a rule, they are easy to hang off or open at, for example, window socket.

If you have a basement, it may be a good idea to install a shrink guard for the windows. Even these are found in beautiful forging constructions. Windows with anti-theft protection can be opened without removing the protection. The bracket is angled so that the underlined window can be opened about 15 cm.

Corner fittings for windows

Hörnjärn is a fitting that is no longer used in the manufacture of window frames. Older date windows were reinforced in all four corners with these windows fittings to increase the stability of the arch. Overhanging corner fittings were often beautifully forged and thus also had a decorative function.

Window production has been constantly renewed, and as part of this it was folded for a period of corner fittings into the bow. The development has meant that no corner fittings are currently used. The bow is joined in a different way and glued with modern, strong and long-lived log liquids.

With careful refurbishment in some environments, forged corner iron can be dotted. If a window is already adorned with a beautiful, albeit shame-shaped corner bracket, this should of course be replaced by a newly created copy or carefully restored.

Worth knowing about lockable windows

If you have lockable joints on all windows, place a or a pair of keys in such a way that you can easily access them. The extra protection creates irritation, which can lead to locking.

If you install new locks in the house, you can choose a locking pin with memory. With this, the same key can be used for all locks in both doors and windows. Because the locking mechanism is very sensitive, turn to an authorized locksmith to get good copies.

Warning!

Insurers have special requirements for burglary barriers to windows. These can include locks with key for all windows, encryption protection, etc. The requirements depend largely on how much your locker is insured for, but also where and in what way you live. Please contact your insurance company and check if your windows are approved.

Worth knowing if you want to use shutters

If you want to use shutters as an additional window lock in your vacation home, suspension and locking are important details. The threads on the doors should be mounted inside the cover. This prevents the cover from being mounted in the trailing edge. When closing the house for a long time, place a metal bomb on the outside of the doors. The boom is placed in special window fittings mounted on the wall of the house and then screwed with a continuous bolt on the inside of the window.

Different types of window fittings



Video: Professional UPVC Window Installation Guide | Eurocell|

Share

Comments